Is this salt chlorination control unit compatible with my pool system?
A:This Aqualix Salt Chlorination Control Unit is designed as a replacement controller for compatible salt chlorine generator systems. Before purchase, please confirm your existing system model, voltage configuration, and installed Turbo Cell type.The controller supports Turbo Cell settings including:- T-CELL-3 - T-CELL-5 - T-CELL-9 - T-CELL-15
Which Turbo Cell models are supported?
The controller can be configured for different Turbo Cell sizes:
| Cell Type |
Pool Size |
| T-CELL-3 |
Up to 15,000 gallons |
| T-CELL-5 |
Up to 20,000 gallons |
| T-CELL-9 |
Up to 25,000 gallons |
| T-CELL-15 |
Up to 40,000 gallons |
Can I replace my existing control unit without replacing the salt cell?
Yes, if your existing salt cell is compatible and still operating properly, you may only need to replace the control unit.
After installation, the controller must be configured to match your existing Turbo Cell type. Incorrect cell selection may cause inaccurate salt readings or improper operation.
What voltage does this salt chlorination controller support?
The system supports both 120VAC and 240VAC power configurations.The factory default configuration is 240VAC. If using 120VAC power, the configuration jumpers must be adjusted according to the installation instructions.
