Which IntelliChlor IC Model Does This Replacement Salt Cell Fit?
This replacement salt cell is available for the following IntelliChlor models:IC15 — Part No. 89420013IC20 — Part No. 89420009IC40 — Part No. 89420006IC60 — Part No. 89420010Select the replacement cell that matches your existing IntelliChlor model.
How Do I Know Which IntelliChlor Replacement Cell I Need?
Check the model of the IntelliChlor cell currently installed in your system and select the matching replacement model.The supported models are IC15, IC20, IC40 and IC60. The replacement cell should match the existing model rather than being selected only by appearance or physical size.
What Salt Level Should I Maintain With This Salt Chlorine Generator?
The system indicates:Salt Low: below 2,800 ppmSalt Normal: 2,800–4,500 ppmSalt High: above 4,500 ppmThe manual lists 3,600–4,500 ppm as the recommended range, with 3,600 ppm indicated as the ideal salt level.
Can I Use This Salt Cell With My Existing Pool Pump?
Yes, provided the system receives adequate water flow.The salt chlorination system operates when the pool circulation pump is running. If water flow through the cell is insufficient, the system can enter a No Flow condition and stop chlorine production.
Does This Salt Cell Work With a Variable-Speed Pump?
The system can be used with a variable-speed pump, but adequate flow through the salt cell must be maintained.When using a variable-speed pump, make sure the pump speed provides sufficient flow for the salt chlorination system to operate normally. A No Flow condition means insufficient water is passing through the system and chlorine is not being produced.
