Choose the salt cell based on your pool volume.

Aqualix T-CELL replacement cells are available in different capacities:

Select a cell that matches your pool size and make sure the controller is configured for the correct cell type.

The Aqualix T-CELL replacement salt cell is compatible with:

• AquaRite
• AquaRite Pro
• SwimPure Plus
• OmniLogic
• OmniPL
• OmniHub
• Pro Logic P4
• Pro Logic PS

The controller must also support the required software version.

For compatible AquaRite systems, software revision r1.5 or newer is required.

Check your existing salt cell model or controller configuration.

The supported cell settings are:

• T-CELL-3 → t-3
• T-CELL-5 → t-5
• T-CELL-9 → t-9
• T-CELL-15 → t-15

The controller must be configured to match the installed cell model. Incorrect configuration can cause inaccurate salt readings, improper operation and possible system shutdown.

Yes, some controllers require configuration after installing a replacement salt cell.

Configuration is required for:

• AquaRite (2009 or later, firmware 1.5+)
• AquaRite Pro
• Pro Logic P4
• Pro Logic PS

No configuration is required for:

• AQ-TROL

Always confirm that the displayed cell type matches the installed salt cell.